Complete Technical Parameters & Product Specifications of Crack‑free Welding Wear Plate
Weikelai Welding provide standardized and customized crack free welding wear plates with complete specifications and customizable parameters. All technical indicators comply with international industrial standards, and B2B buyers can select conventional models or put forward personalized customization requirements according to equipment working conditions.
We implement strict three-level quality inspection system: raw material incoming inspection, production process inspection and finished product factory inspection.
First, we strictly screen base steel plates and alloy welding raw materials to ensure that the raw material indicators meet the standards; during production, we monitor welding temperature, speed and thickness in real time to avoid process errors; after production, we conduct 100% surface crack inspection, hardness sampling test, thickness detection and wear resistance performance test. All unqualified products are strictly prohibited from leaving the factory, fundamentally ensuring product quality reliability.
The detailed parameter specifications are as follows:
|
Parameter Item |
Standard Specification |
Customizable Range |
|---|---|---|
|
Base Plate Material |
Q235 / SS400 Mild Steel |
Customizable carbon steel, low alloy steel |
|
Wear-Resistant Alloy Layer Material |
High Chromium Molybdenum Alloy |
Adjustable alloy ratio for different working conditions |
|
Total Plate Thickness |
6mm, 8mm, 10mm, 12mm, 14mm, 16mm |
5mm-30mm customizable |
|
Alloy Welding Layer Thickness |
3mm-8mm |
2mm-15mm customizable |
|
Surface Hardness |
HRC 55-62 |
HRC 48-65 adjustable |
|
Welding Pattern |
Wave overlay, strip overlay |
Grid, point, customized pattern |
|
Max Standard Size |
1500mm*3000mm |
Custom ultra-large size supported |
|
Working Temperature Resistance |
≤600℃ |
High temperature resistant formula up to 800℃ |
|
Elongation (Toughness Index) |
≥12% |
Adjustable according to impact demand |
|
Wear Resistance Ratio |
3-5 times of ordinary steel plate |
Optimized for extreme wear conditions |
Product Process Standards
All Abrasion Resistant Crack Free Welding Wear Plates adopt multi-layer multi-pass automatic overlay welding process, with uniform welding thickness, tight combination between alloy layer and base layer, no delamination, no pores and no slag inclusions. After welding, the plates are treated with constant temperature stress relief to completely eliminate welding stress, ensuring zero crack in subsequent processing and use. Each batch of products will undergo hardness test, thickness detection, surface flaw detection and wear resistance test before leaving the factory.
